ADM811RARTZ-REEL7, супервизор микропроцессора с активным низким выходным сигналом reset
Описание
Описание ADM811RARTZ-REEL7
The ADM811RARTZ-REEL7 is a reliable voltage Supervisory Circuit suitable for use in most voltage monitoring applications. It is designed to monitor six different voltages, each allowing a 5 or 10% degradation of standard PSU voltages before a reset occurs. These voltages have been selected for the effective monitoring of 2.5, 3, 3.3 and 5V supply voltage levels. Included in this circuit is a debounced manual reset input. Reset can be activated using an electrical switch (or an input from another digital device) or by a degradation of the supply voltage. The manual reset function is very useful, especially if the circuit in which the ADM811 is operating enters into a state that can only be detected by the user. Allowing the user to reset a system manually can reduce the damage or danger that could otherwise be caused by an out-of-control or locked system.
• Logic low RESET output
• Built-in manual reset
• Specified over-temperature
• Superior upgrade for MAX811/MAX812
• Reset assertion down to 1V VCC
• 5µA Typical low power consumption
• 140ms Minimum power-ON reset
| Тип | simple reset/power-on reset |
| Количество проверяемых напряжений | 1 |
| Выход | push-pull, totem pole |
| Сброс | active low |
| Сброс ожидания, мс (Min) | 140 |
| Пороговое напряжение, В | 2.63 |
| Рабочая температура, °C | -40…+85 |
| Корпус | SOT-143 |
| Вес, г | 0.05 |