AD694ARZ, передатчик для токовой петли на 4-20ма
Описание
Описание AD694ARZ
The AD694ARZ is a Monolithic Current that accepts high level signal inputs to drive a standard 4 to 20mA current loop for the control of valves, actuators and other devices commonly used in process control. The input signal is buffered by an input amplifier that can be used to scale the input signal or buffer the output from a current mode DAC. Precalibrated input spans of 0 to 2V and 0 to 10V are selected by simple pin strapping, other spans may be programmed with external resistors. The output stage compliance extends to within 2V of VS and its special design allows the output voltage to extend below common in dual supply operation. An alarm warns of an open 4 to 20mA loop or noncompliance of the output stage. Active laser trimming of the AD694's thin film resistors results in high levels of accuracy without the need for additional adjustments and calibration.
• Single or dual supply operation
• Wide output compliance
• Input buffer amplifier
• Open-loop alarm
• 0.002% Typical nonlinearity
| Максимальная рабочая температура | +85 °C |
| Длина | 10.5мм |
| Производитель | Analog Devices |
| Тип корпуса | SOIC W |
| Тип монтажа | Поверхностный монтаж |
| Ток в рабочей точке | 1.5mA |
| Минимальная рабочая температура | -40 °C |
| Ширина | 7.6мм |
| Высота | 2.35мм |
| Максимальное рабочее напряжение питания | 36 В |
| Число контактов | 16 |
| Размеры | 10.5 x 7.6 x 2.35мм |
| Выходной ток | 0 → 20 mA, 4 → 20 mA |
| Погрешность интервала | 0.05% |
| Вес, г | 0.8 |